DNS Best Practices for Domains

Copy-pasteable templates for the DNS configurations users ask about most. Use these as the source of truth rather than reasoning about record formats from memory. When applying via the plugin's dns command, translate the templates into the dns MCP tool's operation: set parameters and preserve any existing records the user isn't replacing.

Email

Google Workspace (Gmail for business)

Replace example.com with the target domain. These are the current Google Workspace MX records.

Type   Host   Value                   Priority   TTL
MX     @      smtp.google.com.        1          3600

Google consolidated MX from the old five-record set to a single smtp.google.com record in 2023. Older tutorials still show the ASPMX.L.GOOGLE.COM / ALT1-ALT4 setup — both work, but the single-record form is the official current recommendation.

Plus these TXT records:

Type   Host                       Value
TXT    @                          v=spf1 include:_spf.google.com ~all
TXT    google._domainkey          <DKIM key from Google Admin → Apps → Gmail → Authenticate email>
TXT    _dmarc                     v=DMARC1; p=quarantine; rua=mailto:[email protected]; pct=100

Notes:

• The DKIM selector google._domainkey is Google's default; do not change it.
• Start DMARC with p=none for the first week to collect reports, then ramp to p=quarantine and eventually p=reject if aggregate reports show no legitimate traffic being quarantined.
• rua points at a mailbox that receives aggregate reports. Use a dedicated address (it gets busy).

Fastmail

Type   Host   Value                                Priority   TTL
MX     @      in1-smtp.messagingengine.com.        10         3600
MX     @      in2-smtp.messagingengine.com.        20         3600

Plus these TXT records:

Type   Host                       Value
TXT    @                          v=spf1 include:spf.messagingengine.com ?all
TXT    fm1._domainkey             <CNAME to fm1.<domain>.dkim.fmhosted.com>
TXT    fm2._domainkey             <CNAME to fm2.<domain>.dkim.fmhosted.com>
TXT    fm3._domainkey             <CNAME to fm3.<domain>.dkim.fmhosted.com>
TXT    _dmarc                     v=DMARC1; p=quarantine; rua=mailto:[email protected]

Note: Fastmail DKIM is set up as CNAMEs pointing at their hosted DKIM records, not inline TXT. Get the exact hosts from Fastmail admin.

ProtonMail / Proton Mail

Type   Host   Value                         Priority   TTL
MX     @      mail.protonmail.ch.           10         3600
MX     @      mailsec.protonmail.ch.        20         3600

TXT records (Proton provides the exact DKIM selectors in their admin panel):

Type   Host                          Value
TXT    @                             v=spf1 include:_spf.protonmail.ch ~all
TXT    protonmail._domainkey         <from Proton admin>
TXT    protonmail2._domainkey        <from Proton admin>
TXT    protonmail3._domainkey        <from Proton admin>
TXT    _dmarc                        v=DMARC1; p=quarantine; rua=mailto:[email protected]

SPF recipes

SPF syntax trips people up. Use these templates instead of hand-crafting.

Single provider (Google):

v=spf1 include:_spf.google.com ~all

Single provider (Fastmail):

v=spf1 include:spf.messagingengine.com ?all

Two providers (Google + transactional via Postmark):

v=spf1 include:_spf.google.com include:spf.mtasv.net ~all

Shared mailbox on your own server (specific IPs):

v=spf1 ip4:192.0.2.10 ip4:192.0.2.11 -all

No mail should originate from this domain at all (park domains):

v=spf1 -all

Terminators:

• ~all — soft fail (recommended default during DMARC ramp)
• -all — hard fail (only after DMARC reports confirm clean)
• ?all — neutral (Fastmail's documentation recommends this)
• +all — allow anything (NEVER use in production)

Lookup limit: SPF allows at most 10 DNS lookups total across all include: directives. Going over produces a permanent error. If hitting the limit, flatten with a tool like spf-flatten or consolidate providers.

DMARC ramp-up

Recommended progression for a new domain:

1. Week 1 (observe): v=DMARC1; p=none; rua=mailto:[email protected]
2. Weeks 2–4 (tighten after reports are clean): v=DMARC1; p=quarantine; pct=25; rua=mailto:[email protected]
3. Week 5+ (enforce): v=DMARC1; p=quarantine; rua=mailto:[email protected]
4. Long-term (after confidence): v=DMARC1; p=reject; rua=mailto:[email protected]

Never jump from p=none straight to p=reject. Transactional mail that forgot to pass SPF/DKIM will disappear silently.

Web hosting

Apex A records pointing at an IP

Type   Host   Value           TTL
A      @      192.0.2.10      3600
A      @      192.0.2.11      3600       (optional — second A for redundancy)
AAAA   @      2001:db8::10    3600       (optional — IPv6)

Apex pointing at a host (problematic — CNAME not allowed on apex)

CNAME records are forbidden on the apex (@) per RFC 1034. If your host only gives you a hostname (e.g., myapp.vercel.app), solutions:

1. ALIAS / ANAME / flattened CNAME — some DNS providers support this as an extension (Dynadot, Cloudflare, Route 53 with alias). Check the Dynadot dns tool's supported types.
2. Manual A record — resolve the host to an IP and use an A record, accepting that the IP can change.
3. Front with a redirect — use URL forwarding on the apex, put the app on www.example.com with a CNAME.

www subdomain

Type   Host   Value           TTL
CNAME  www    example.com.    3600

Or point www at the same IP as the apex with an A record. Both work; CNAME is cleaner if the apex ever moves.

HTTPS redirect from apex to www (or vice versa)

DNS alone cannot redirect HTTPS traffic. Either:

• Use the Dynadot URL forwarding feature via domain_settings (operates at HTTP level, user's browser hits Dynadot's redirect service first).
• Run a redirect server at the apex that does HTTP/HTTPS 301.

CAA — restrict which Certificate Authorities can issue certs

Prevents rogue CAs from issuing certificates for your domain. Always add CAA records once you pick a CA.

LetsEncrypt only:

Type   Host   Value
CAA    @      0 issue "letsencrypt.org"
CAA    @      0 issuewild "letsencrypt.org"

LetsEncrypt + DigiCert (for wildcard + EV certs):

Type   Host   Value
CAA    @      0 issue "letsencrypt.org"
CAA    @      0 issue "digicert.com"

Report unauthorized attempts:

Type   Host   Value
CAA    @      0 iodef "mailto:[email protected]"

Deny all (extreme — use only if certs are issued elsewhere and pre-installed):

Type   Host   Value
CAA    @      0 issue ";"

Domain verification TXT records

Each service has its own format. Do NOT try to generate these — the verification service gives you the exact string to paste.

Service	Typical host	Typical format
Google Search Console	@	google-site-verification=<token>
Google Workspace	@	google-site-verification=<token> (different from Search Console)
Microsoft 365	@	MS=ms<numbers>
Apple Business Manager	@	apple-domain-verification=<token>
Facebook Business	@	facebook-domain-verification=<token>
GitHub Pages	_github-pages-challenge-<org>	<token>
Vercel	_vercel	<token>

Preserve these — they're often short-lived but users forget they exist and accidentally delete them.

Subdomain delegation

To delegate sub.example.com to different nameservers (for a separate DNS provider, a subsidiary, or a development cluster):

Type   Host   Value                    TTL
NS     sub    ns1.provider.net.        3600
NS     sub    ns2.provider.net.        3600

Now sub.example.com and everything under it is resolved by the delegated nameservers, not Dynadot's.

Common mistakes to flag

• Trailing dot. Values like smtp.google.com. are fully qualified; without the trailing dot some DNS UIs append the domain, producing smtp.google.com.example.com. Most modern UIs normalize this, but flag it if records look doubled-up.
• TTL too low. TTL below 300 is almost never appropriate — you get slammed with repeat queries. Default to 3600 unless actively debugging.
• TTL too high. TTL above 86400 makes emergency changes hard. 3600 is the sweet spot for most records.
• Overlapping SPF. Only ONE SPF record per domain. Multiple v=spf1 records on the same host produce a permanent error.
• Missing reverse DNS. For outbound mail, receiving servers often check that the sending IP's PTR record matches. Not DNS you control from the registrar — it's set at the hosting provider.

How to use this skill in a workflow

When the user describes a DNS setup task, do NOT try to recall record formats from memory. Pattern-match the task to one of the sections above and use the template verbatim. If the user's situation isn't covered, say so and ask for the provider's published DNS setup docs — do not guess.

When applying records via the plugin's dns command, preserve any existing records for tuples the new template doesn't touch. The dns MCP tool's operation: set rewrites the whole record set, so the user's existing A records, verification TXTs, etc. must be included in the call alongside the new records from the template.